How to repair leaking roofs

Tired of the dripping sound consistently? Is it irritating you? Leaking roofs can cause a major damage if not repaired immediately.It is often assumed that it cannot be fixed without professional help but it is false.With correct equipments and techniques, you can fix your roof without seeking professional help.

Here are some of the basic methods to fix the leaking according to the roof.

• Shingles:

If you have shingles on yourroofs then you can repair it in a simple way. All you need is cement or waterproof sealant. Find the source or the shingle, which is leaking and unfasten the nails at the lower bottom. Push the shingle up and apply a thin layer of cement or sealant under it on the roof and then place the shingle on its initial place and apply a layer again on top of it the shingle or the crack. This way you can repair your roofs in convenient ways.

• Shake roof

Leaking problems on such roofs can only besolved by replacing it as no cement or sealant will do their wonders on the wooden roof.To replace a shake roof, you need to remove the nails but pulling it with a pyre bar will not help you.You need to cut the nail head with the help of hacksaw. In order to replace a new shake roof, cut the shake roof a bit smaller and then try to remove it. You can then place this with the new one using the galvanized nails.

• Flat roof

This is one of the most common types of roofing systems that you will find in most homes and commercial building and hence it may be easy to repair them. Flat roofs are made out of tar and roofing cement in layers and are often found with blisters, which cause leaking problems. In order to fix a blister, you will require some tools that include a utility knife, roofing cement, mop, and brush. All you need to do is, first clean all the accumulated water near the damaged area with a mop and clean the residue with a bush. Now cut and open the blister in the center with the utility knife and squeeze out water if collected under the blister. Spread a thick layer of cement on the edges of the blister and press the loose ends of the blisters firmly. Fasten the edges of the blister with nails so as to solve the problem permanently and again apply a layer of cement on the repaired area.

However, there are few roofing problems that you can repair by yourself if you have the required tools in hand. But for major problems, it is advisable that you seek help of a professional engineer who can fix the problem. This will not only save your time but also provide a peace of mind. So, next time, if you have any problem with your roofing system, find it and then take an intelligent decision.